Protect Your Hardwood Before the Finish Fails
A maintenance coat—also called screen and recoat—can protect a suitable existing finish without full sanding. Inspection determines whether your floor qualifies.

The right middle step only when the finish is still a good candidate.
A maintenance coat is preventative maintenance, not a cure for every hardwood problem.
Often a candidate
- Dull finish with the wood still protected
- Light surface scratches and normal wear
- No widespread bare or gray wood
- A compatible, properly prepared existing finish
Needs a different conversation
- Deep scratches or widespread finish failure
- Gray or black water-damaged areas
- Heavy wax or unknown contamination
- A desired stain-color change
Your recommendation and quote are based on the actual condition and finish of your floor.
Compare your hardwood maintenance options.
| Service | Starting price |
|---|---|
| Hardwood floor cleaning | $1.50 per square foot |
| Clean and polish | $1.80 per square foot |
| Maintenance recoat | $3.00 per square foot |
| Wax removal | $2.00 per square foot |
| Standard job minimum | $150 |
All prices are starting points and subject to on-site inspection. We confirm the exact price before work begins.
Preparation and compatibility come first.
Inspect and test
We check wear, bare spots, contamination, and finish condition and test where appropriate.
Clean and prepare
The floor is cleaned and lightly abraded to support adhesion of the new coat.
Apply the coating
A compatible protective coat is applied under suitable job conditions.
Explain the cure window
You receive exact walk-on, furniture, rug, and maintenance instructions for the coating used.
Real reviews. Real local work.
Read verified feedback from local customers, then book when you are ready.
Make the cleaning-versus-coating decision with clear facts.
How much does a hardwood maintenance coat cost?
Maintenance recoating starts at $3.00 per square foot with a $150 minimum. Final pricing depends on square footage, preparation, floor condition, and compatibility and is subject to inspection.
What is a screen and recoat?
It is a maintenance process that cleans and lightly abrades a compatible existing finish so a new protective coat can bond. It does not sand the floor to bare wood or change the stain color.
Will a maintenance coat remove deep scratches?
No. It can improve the appearance of light surface wear, but deep scratches, bare wood, gray areas, and water damage may require repair or more extensive work.
Can every hardwood floor be recoated?
No. Contamination, wax, unknown products, finish failure, severe wear, and compatibility issues can make recoating inappropriate without additional preparation. Inspection is essential.
How long before we can use the room?
Walk-on, furniture, and rug timing depends on the coating and job conditions. We provide product-specific instructions before leaving. Following those cure windows is important.
How is this different from cleaning or polishing?
Cleaning removes soil and residue. Clean and polish adds a maintenance appearance layer when appropriate. A maintenance recoat abrades and applies a new protective finish coat to a suitable existing finish.
Find out whether your floor qualifies.
Request an assessment and get a clear recommendation before committing to a maintenance coat.
